ParkMaster 3D you can now fly aerobatics outdoors just like you do indoors!
Designed by world renowned R/C pilot and German Indoor Aerobatics Champion,
Martin Muller, the ParkMaster is built from the ultra durable ELAPOR®
foam making it tough enough for everyday flying. The PARKMASTER 3D can also be
flown outdoors in moderate wind, something you can’t do with your typical indoor
“foamy” models”. When built out with the optional Flight (#M999233) and Power
(M#993233) the ParkMaster 3D will have all the power and control need to fly the
most difficult 3D maneuvers.
- Pre-fabricated molded
ELAPOR® foam parts
- Fully 3-D capable
- Ultra Low Wing Loading
- Ideal for Honing Your
contents:Molded ELAPOR® parts, Carbon Fiber / Glass Filled Plastic Spars and
fuselage longerons, all plastic parts required to assemble the model, small
items and linkage components, decal sheet, detailed0 instructions.
Wing Length: 39 in.
Wing Area: 450 Sq. In.
Wing Loading: 6.7 oz/sq ft.
Fuselage Length: 40 in.
Motor: 200+ watt 28mm Outrunner (not included)
Battery: 3S 950 mAh LiPo (not included)
Speed Control: 17 - 27 amp (not included)
Weight (English): 21 oz.
Flight Characteristics: 3D Aerobatics
Target User: Advanced-Intermediate